A lone vehicle drives on this section of North bound IH-35E as South bound traffic sits at a complete stop, Saturday, in Sanger, Texas. Icy, treacherous sections of Interstate 35 north of Dallas were closed for hours at a time over the last day as tractor-trailers had trouble climbing hills, wrecks occurred and vehicles stalled, authorities said. An ice storm is expected Sunday through inland parts of the mid-Atlantic.

Tony Gutierrez

A lone vehicle drives on this section of North bound IH-35E as South bound traffic sits at a complete stop, Saturday, in Sanger, Texas. Icy, treacherous sections of Interstate 35 north of Dallas were closed for hours at a time over the last day as tractor-trailers had trouble climbing hills, wrecks occurred and vehicles stalled, authorities said. An ice storm is expected Sunday through inland parts of the mid-Atlantic.

Virginia preps for ‘historic’ ice storm; rain for EC

From staff, wire reports

0 Comments | Leave a Comment

MEMPHIS, Tenn. — A late fall cold snap that has gripped much of the country is being blamed for a handful of deaths and has forced people to deal with frigid temperatures, power outages by the thousands and treacherous roads.

Weather forecasters say the powerful weather system has Virginia and the Mid-Atlantic in its icy sights next.

In Virginia, state Emergency Management spokeswoman Laura Southard said the storm had the potential to be a “historic ice event.”

“This forecast is very concerning to us,” Southard said Saturday. “I’ve worked multiple disasters, but I’ve never worked an ice storm with a forecast like this. It’s just really important for everybody to take extra precautions.”

Temperatures in Montana and South Dakota were more than 20 degrees below zero during the day Saturday while much of the Midwest was in the teens and single digits. Wind chill readings could drop as low as 50 below zero in northwestern Minnesota, weather officials said.

Icy conditions were expected to last through the weekend from Texas to Ohio to Tennessee, and Virginia officials warned residents of a major ice storm likely to take shape Sunday, resulting in power outages and hazards on the roads.

In Elizabeth City, rain was expected to arrive by early Sunday morning, with a low of 37 and a north wind around 15 mph. A steady rain is expected during the day Sunday with a high near 47 and northeast winds of 13 to 16 mph.

A chance of rain continues on Monday, but with a warmer high near 60 and a southwest wind of 5 to 9 mph. Rain is in the forecast through Tuesday, followed by colder temperatures and sunshine on Wednesday with a high near 45.

In California, four people died of hypothermia in the San Francisco Bay area and about a half-dozen traffic-related deaths were blamed on the weather in several states.

More than 100,000 customers in the Dallas area were without power Saturday, with about 7,000 in Oklahoma and thousands more in other states. Some 400 departing flights from Dallas/Fort Worth International Airport had been canceled in the morning, the airport said. About 3,330 passengers had stayed overnight in the terminals.

Icy, treacherous sections of Interstate 35 north of Dallas were closed for hours at a time over the last day as tractor-trailers had trouble climbing hills, wrecks occurred and vehicles stalled, authorities said.

Tina Pacheco, her husband and two friends were traveling through Texas on their way to Mexico when the ice-laden interstate became so treacherous that traffic came to a standstill. They were forced to spend Friday night in their pickup truck. They parked on a service road and kept the truck running for heat.

“We couldn’t go anywhere,” she said, adding, “It’s a good thing we had gas.”

Jody Gonzalez, chief of Denton County Emergency Services, said about 200 people were in shelters in the Sanger area after getting stuck on the highway. People in that area of I-35 were driving through ruts in 4-inch-thick ice, he said.

Texas Department of Transportation spokeswoman Michelle Releford said road graders and more sand and salt trucks were being sent to try to ease the ice problems.

“We’re sending in everything we’ve got,” said Releford.

Freezing rain and sleet are likely again Saturday night in Memphis, Nashville and other areas of Tennessee before the storm starts surging northeast.

“It looks like we’re going to be stuck with this for one, two, maybe three days,” said Memphis attorney Sam Chafetz, who was going home early to enjoy some bourbon-soaked sweet potatoes left over from Thanksgiving.

“I’m not afraid of the ice and snow, I’m afraid of the other drivers who don’t know how to drive in it,” Chafetz said.

The weather forced the cancellation of countless events, including Sunday’s Dallas Marathon, which was expected to draw 25,000 runners, some of whom had trained for months, and the St. Jude Marathon in Memphis, expected to include 20,000.

Meanwhile, a football game between Central Florida and Southern Methodist in ice-covered Dallas went on in front of a sparse crowd.

Around 7 inches of snow fell in northeast Arkansas and the Missouri boot heel, according to the National Weather Service in Memphis, and 8 to 9 inches fell in parts of southern Indiana. The storm dumped a foot of snow and more in some areas of Illinois, with police scrambling to respond to dozens of accidents and forced scores of schools to remain closed.

Ice accumulated on trees and power lines in Memphis and the rest of West Tennessee after layers of sleet fell throughout the region Friday but most roads were passable Saturday.

Looking ahead, the National Weather Service says a wind chill advisory is in effect for parts of northeast Arkansas and the Missouri boot heel. Forecasters say wind chill readings between zero and minus-5 degrees may occur. Usually in the area, snowstorms are followed by fairly quick rebounds into warm weather, but not this time.

Ice had built up on the windshields and roofs of parked cars throughout Memphis into Saturday. Law enforcement reported an increase in traffic crashes, and scattered power outages affected more than 3,000 people, emergency and utility officials said.

Residents were told to prepare for a few days without power, prompting them to rush to stores to stock up on groceries, buy electricity generators and gas up their cars. Shelby County Mayor Mark Luttrell reminded residents to check on family and friends who are elderly, disabled or live alone.

ERROR 500 - INTERNAL SERVER ERROR

Why am I seeing this page?

500 errors usually mean that the server has encountered an unexpected condition that prevented it from fulfilling the request made by the client. This is a general error class returned by a web server when it encounters a problem in which the server itself can not be more specific about the error condition in its response to the client.

In many cases this is not an indication of an actual problem with the server itself but rather a problem with the information the server has been instructed to access or return as a result of the request. This error is often caused by an issue on your site which may require additional review by our support teams.

Our support staff will be happy to assist you in resolving this issue. Please contact our Live Support or reply to any Tickets you may have received from our technicians for further assistance.

Is there anything that I can do?

There are a few common causes for this error code including problems with the individual script that may be executed upon request. Some of these are easier to spot and correct than others.

File and Directory Ownership

The server you are on runs applications in a very specific way in most cases. The server generally expects files and directories be owned by your specific user cPanel user. If you have made changes to the file ownership on your own through SSH please reset the Owner and Group appropriately.

File and Directory Permissions

The server you are on runs applications in a very specific way in most cases. The server generally expects files such as HTML, Images, and other media to have a permission mode of 644. The server also expects the permission mode on directories to be set to 755 in most cases.

(See the Section on Understanding Filesystem Permissions.)

Command Syntax Errors in .htaccess file

In the .htaccess file, you may have added lines that are conflicting with each other or that are not allowed.

If you would like to check a specific rule in your .htaccess file you can comment that specific line in the .htaccess by adding # to the beginning of the line. You should always make a backup of this file before you start making changes.

For example, if the .htaccess looks like

DirectoryIndex default.html
AddType application/x-httpd-php5 php

Then try something like this

DirectoryIndex default.html
#AddType application/x-httpd-php5 php

Note: Due to the way in which our server environments are setup you may not use php_value arguments in a .htaccess file.

Exceeded Process Limits

It is possible that this error is caused by having too many processes in the server queue for your individual account. Every account on our server may only have 25 simultaneous processes active at any point in time whether they are related to your site or other processes owned by your user such as mail.

With SSH (shell) access, you can view the processes running on your account. Simply type this command:

ps faux

Or type this to view a specific user's account (be sure to replace username with the actual username):

ps faux |grep username

Once you have the process ID ("pid"), type this to kill the specific process (be sure to replace pid with the actual process ID):

kill pid

Our server administrators will be able to advise you on how to avoid this error if it is caused by process limitations. Please contact our Live Support or open a Ticket. Be sure to include the steps needed for our support staff to see the 500 error on your site.

Understanding Filesystem Permissions

Symbolic Representation

The first character indicates the file type and is not related to permissions. The remaining nine characters are in three sets, each representing a class of permissions as three characters. The first set represents the user class. The second set represents the group class. The third set represents the others class.

Each of the three characters represent the read, write, and execute permissions:

  • r if reading is permitted, - if it is not.
  • w if writing is permitted, - if it is not.
  • x if execution is permitted, - if it is not.

The following are some examples of symbolic notation:

  • -rwxr-xr-x a regular file whose user class has full permissions and whose group and others classes have only the read and execute permissions.
  • crw-rw-r-- a character special file whose user and group classes have the read and write permissions and whose others class has only the read permission.
  • dr-x------ a directory whose user class has read and execute permissions and whose group and others classes have no permissions.

Numeric Representation

Another method for representing permissions is an octal (base-8) notation as shown. This notation consists of at least three digits. Each of the three rightmost digits represents a different component of the permissions: user, group, and others.

Each of these digits is the sum of its component bits As a result, specific bits add to the sum as it is represented by a numeral:

  • The read bit adds 4 to its total (in binary 100),
  • The write bit adds 2 to its total (in binary 010), and
  • The execute bit adds 1 to its total (in binary 001).

These values never produce ambiguous combinations. each sum represents a specific set of permissions. More technically, this is an octal representation of a bit field – each bit references a separate permission, and grouping 3 bits at a time in octal corresponds to grouping these permissions by user, group, and others.

Permission mode 0755

4+2+1=7
Read, Write, eXecute
4+1=5
Read, eXecute
4+1=5
Read, eXecute

Permission mode 0644

4+2=6
Read, Write
4
Read
4
Read

How to modify your .htaccess file

The .htaccess file contains directives (instructions) that tell the server how to behave in certain scenarios and directly affect how your website functions.

Redirects and rewriting URLs are two very common directives found in a .htaccess file, and many scripts such as WordPress, Drupal, Joomla and Magento add directives to the .htaccess so those scripts can function.

It is possible that you may need to edit the .htaccess file at some point, for various reasons.This section covers how to edit the file in cPanel, but not what may need to be changed.(You may need to consult other articles and resources for that information.)

There are Many Ways to Edit a .htaccess File

  • Edit the file on your computer and upload it to the server via FTP
  • Use an FTP program's Edit Mode
  • Use SSH and a text editor
  • Use the File Manager in cPanel

The easiest way to edit a .htaccess file for most people is through the File Manager in cPanel.

How to Edit .htaccess files in cPanel's File Manager

Before you do anything, it is suggested that you backup your website so that you can revert back to a previous version if something goes wrong.

Open the File Manager

  1. Log into cPanel.
  2. In the Files section, click on the File Manager icon.
  3. Check the box for Document Root for and select the domain name you wish to access from the drop-down menu.
  4. Make sure Show Hidden Files (dotfiles)" is checked.
  5. Click Go. The File Manager will open in a new tab or window.
  6. Look for the .htaccess file in the list of files. You may need to scroll to find it.

To Edit the .htaccess File

  1. Right click on the .htaccess file and click Code Edit from the menu. Alternatively, you can click on the icon for the .htaccess file and then click on the Code Editor icon at the top of the page.
  2. A dialogue box may appear asking you about encoding. Just click Edit to continue. The editor will open in a new window.
  3. Edit the file as needed.
  4. Click Save Changes in the upper right hand corner when done. The changes will be saved.
  5. Test your website to make sure your changes were successfully saved. If not, correct the error or revert back to the previous version until your site works again.
  6. Once complete, you can click Close to close the File Manager window.

How to modify file and directory permissions

The permissions on a file or directory tell the server how in what ways it should be able to interact with a file or directory.

This section covers how to edit the file permissions in cPanel, but not what may need to be changed.(See the section on what you can do for more information.)

There are Many Ways to Edit a File Permissions

  • Use an FTP program
  • Use SSH and a text editor
  • Use the File Manager in cPanel

The easiest way to edit file permissions for most people is through the File Manager in cPanel.

How to Edit file permissions in cPanel's File Manager

Before you do anything, it is suggested that you backup your website so that you can revert back to a previous version if something goes wrong.

Open the File Manager

  1. Log into cPanel.
  2. In the Files section, click on the File Manager icon.
  3. Check the box for Document Root for and select the domain name you wish to access from the drop-down menu.
  4. Make sure Show Hidden Files (dotfiles)" is checked.
  5. Click Go. The File Manager will open in a new tab or window.
  6. Look for the file or directory in the list of files. You may need to scroll to find it.

To Edit the Permissions

  1. Right click on the file or directory and click Change Permissions from the menu.
  2. A dialogue box should appear allowing you to select the correct permissions or use the numerical value to set the correct permissions.
  3. Edit the file permissions as needed.
  4. Click Change Permissions in the lower left hand corner when done. The changes will be saved.
  5. Test your website to make sure your changes were successfully saved. If not, correct the error or revert back to the previous version until your site works again.
  6. Once complete, you can click Close to close the File Manager window.
This site is hosted by HostGator!
'; $(window).load(function() { var panels_num=$("div.story-body").find("div.story-body-text").find("div.pane-content").children().size(); var childSplit=Math.ceil(panels_num/2); $("div.story-body").find("div.story-body-text").find("div.pane-content").children().eq(childSplit).before(data); });